ZBQ50 / 6 pneumatic grouting pump basic parameters

ZBQ50 / 6 mining pneumatic grouting pump to adapt to frequent mobile multi-point grouting, because of its compact size and light weight advantages, and more used in subway - mine - water conservancy construction, grouting water and broken rock formation consolidation project , And well depth pre-grouting face, and flammable and explosive, strong radiation, dust and more particles, small temperature changes and water can be easily used place. Because of the pneumatic drive, the grouting performance of the pump is very suitable for high flow rate when the grouting pressure is low, and low flow rate when the grouting pressure is increasing. The pump can be used as single grouting (grout) and double fluid Grouting (slurry, water glass), but also can be used for conveying other viscosity or corrosive is not too large a variety of slurry and water, can be described as a pump multi-purpose, convenient and practical greatly reduced the purchase cost of construction equipment. Today's latest valid order information free to send! Morning latest buyers information free to send! Punch grab Rob here! Model ZBQ50 / 6 Model Name Unit Basic parameters Rated flow L / min 30, 50, 100 Rated working pressure Mpa 10,6,3 Slurry cylinder by mm 60,75,100 Stroke length mm 120 Reciprocating times min-1 2- 55 Supply pressure mpa 0.6 ~ 0.7 Regulated pressure mpa 0.05 ~ 0.6 Cylinder straight through mm 250 Ventilation Directly G1 Compressed air consumption m3 / min ≤0.7 Supporting motor power KW Supporting motor Model Weight KG 60 Dimensions (L × W × H ) Mm 1000 × 504 × 645

Accessory

Taekwondo Keychain,Taekwondo Key Chain,Taekwondo Key Ring

Mat & Floor Series Co., Ltd. , http://www.sdtaekwondo.com

Posted on