When paving tiles, tile tiles are used to make the tiles look beautiful in the interior. If the tile gap is relatively large, the tiles will only play a counter-productive effect. For this reason, many people want to understand the construction techniques of the taping after paving the tiles, and let the interior decoration create an unblemished floor. Then we share the method of tile jointing and what materials are used for the tile jointing.
Tile jointing method
1. Before sewing, clean the gap between tiles and tiles to remove dust. Also remove the loose tile adhesive between the tile gaps.
2. Add the appropriate amount of water to the powder and start stirring until there is no block. The mixture is allowed to stand for 5 minutes, and then the tiles can be jointed after slightly stirring.
3, when the joints can be selected rubber joints or with a suitable scraper, the already well-staggered grout added directly to the gap in the tile. Tile gaps fill the gap either diagonally or in a circular motion. Try not to leave too much grout on the tiles, and then clean the surface of the tiles regularly with a damp sponge or damp cloth before solidifying.
4. Clean the tile surface with a sponge and wait until the sealant film has dried. Rinse with water immediately after use.
What kind of material for tile jointing
1, US grout
After the US agent is cured, it becomes a high-grade pigment. It is rich in color and bright in color. It is suitable for matching with various color tiles. Its whiteness is about 95%, and the surface layer has high strength and toughness. The surface is smooth, easy to scrub, easy to clean, waterproof and moisture resistant. The tiles will not be contaminated during construction; the use of U.S.
2, putty powder
Putty powder, also known as binder, mainly plays a role in bonding. The putty binder is cement and organic polymer, and the organic polymer is divided into emulsion and latex powder. Organic polymers can be modified and toughened to improve putty performance.
3, white cement
White cement has low adhesive strength and serious pulverization. It is a breeding ground for molds in wet environments. Directly hooking wide brick joints will produce a large number of cracks. The only advantage is low prices.
The above is related to the tile jointing method and the materials used for the tile jointing . After reading this, there is no more understanding of this aspect! For more relevant knowledge, please continue to pay attention to this site information, more exciting please look forward to!
Tile jointing agent tile jointing method
Aluminum Tread Plate,Aluminium Tread Plate Five Bar,1100 Aluminium Tread Plate,1100 Aluminum Tread Plates
Zhengzhou Yearshine Industry Co., Ltd , https://www.zzyscorp.com