Do you know which parts of the hydraulic system are made up? The following Dalan hydraulic system will explain to you.
Do you know which parts of the hydraulic system are made up? The following Dalan hydraulic system will explain to you.
The hydraulic system consists of a power component (oil pump), an actuator (cylinder or hydraulic motor), control components (various valves), auxiliary components and working medium.
1, power components (oil pump)
Its function is to convert the liquid energy of the liquid using the prime mover into hydraulic pressure energy; it is the power part of the hydraulic transmission.
2, the actuator (cylinder, hydraulic motor)
It converts the hydraulic energy of a liquid into mechanical energy. Among them, the cylinder makes a linear motion and the motor performs a rotary motion.
3. Control components
Including pressure valves, flow valves and directional valves.
Their role is to adjust the speed of the liquid motor steplessly as needed, and to regulate and control the pressure, flow and flow direction of the working fluid in the hydraulic system.
4, auxiliary components
In addition to the above three components, including pressure gauges, oil filters, energy storage devices, coolers, pipe fittings and fuel tanks, they are equally important.
PS: Pipe fittings mainly include: various pipe joints (flare, welded, ferrule, flange), high pressure ball valve, quick change joint, hose assembly, pressure tap, pipe clamp, etc.
Hydraulic pipe joints are divided into: hydraulic hoses, high pressure ball valves, quick connectors, ferrule fittings, welded pipe joints, high pressure hoses.
The most significant difference between a hydraulic pipe joint and a common pipe joint is that the hydraulic pressure is surprisingly large, and the impact of the hydraulic oil pipe suddenly bursting oil is large. It is not possible to replace the special joint with ordinary ones, because the hydraulic pressure can withstand a lot of pressure.
5, working medium
Working medium refers to hydraulic oil or emulsion in various hydraulic transmissions. It converts energy through oil pump and liquid motor. The hydraulic system is the movement and power transmission through the medium.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Plain Particle Board is mainly used for furniture and carriage of bus, train.The bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.Melamine paper is the most popular to be as the face board, it is abrasion resistant, heat resistant, fouling resistant, clean is simple.The Engineering wood is also as the face and back surface. It is more cheaper and beautiful, can reach the same wood grain effect as the veneer surface.And we have High Quality Particle board .LULI Group Co. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Plywood , venner, MDF , Particle Board , Door skin , Blockboard , Finger joint board, OSB , paper, Steel etc.And we have Plain High-density Particle Board and Plain Chipboard Board
Plain Particle Board Details:
size:1220*2440MM 1250*2000MM 1525*2440MM 1830*2440MM
THICKNESS:9MM-40MM
MATERIAL:POPLAR, COMBINE, PINE
GLUE:E0, E1, E2
CERTIFICATION:CARB, FSC, CE
Plain Particle Board
Plain Particle Board,Plain High-density Particle Board,Plain Chipboard Board,Plain Melamine Particle Board
Luli Group Co.,Ltd. , https://www.cnluli.com