Rolling bearing device basics

Home>Bearing knowledge>Floating bearing device basics
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Rolling bearing device basics

Source: Bearing network time: 2013-06-18
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Rolling bearing device basics bearing device is very important; the bearing device is good or bad; it will affect the bearing accuracy, life and function. Therefore; please fully study the bearing device; that is, please include the following items Operating specifications for bearing installations.
1. Clear the bearing and related parts. It is not necessary to remove the bearing that is now grease-smooth and the bearing device with oil seal or dust cover and seal on both sides.
2. View the scale and finishing status of the associated parts.
3. Device means The device of the bearing shall be determined according to the bearing layout, the size of the scale and the cooperative nature of the bearing components; the pressure shall be directly applied to the end face of the tight ferrule; the pressure shall not be transmitted through the tumbling body.
Recommend to friends comments close window

Bearing related knowledge
Specification for the selection of bearing lubricants
NTN outer spherical bearing protection
NSK bearing oscillation and temperature discrimination bearing damage How to distinguish the quality of automotive bearings, how to make "SKF bearings smooth and reduce noise" quality method theory


This article links to http://
Please indicate China Bearing Network http://

Previous:Analysis and Solution of Factors Affecting Motor Bearing Overheating Next: Misunderstanding on TIMKEN Bearing Quality Discrimination

Sanitary Clamps
Sanitary Clamps Fittings is an important connection part of sanitary fittings. They are usually of material stainless steel 304. With a gasket, a clamp can match two ferrules tightly together without any leakage. KAYSEN sanitary clamps supply mainly four kinds of clamps: 13MHH/DIN heavy duty single pin clamp, 13MHHM-DP/13SF double pins clamp, 13MHP high pressure bolted clamps with brass nuts, and 3-pc clamps(13MHHM-3P) which can meet customer`s different requests.

Sanitary Clamp – Stainless Steel Hygienic Fittings

Size: 1/2″ thru 12″
Material: SS304, SS316L, EN 1.4301, EN 1.4404 etc.
Standard: 3A, DIN, SMS, BS, ISO, RTJ, IDF, INCH,etc.
Sealing Gasket: Silicone, EPDM, PTFE, Buna-N etc.
Temp.: -30°C / -22°F up to +120°C/ +248°F
Application: Pharmacy, Beer, Food, Petroleum, Dairy, Beverage, Biotech ,Cosmetics etc.

Sanitary Clamps

Sanitary Clamps,3A Sanitary Clamps,Din Sanitary Clamps,13Mhh Heavy Duty Clamps

Kaysen Steel Industry Co., Ltd. , http://www.chinasanitaryvalve.com

Posted on