Remaining decoration materials left or thrown: white latex paint does not have to stay

After the renovation of the owners, more or less will be left with some trimmings, leaving the place to occupy, throwing it and feeling pity, fearing that there is a need for backup in the future... Then, should these "remaining materials" should not stay? Or listen to the experts to answer your questions.

White latex paint does not have to be retained

Experts said that the remaining materials for the decoration were mainly used to repair the corners. Because many homes have not been moved into the house after the completion of the basic foundation decoration; many accessories such as paintings have not been installed. During the handling and installation process, it is inevitable that there will be a bump between the wall and the door and window frame. If there is material spare, it can be repaired in time.

Repairing with the remaining decorative materials may also result in some chromatic aberration, but experts say that repairing the remaining material can minimize the difference between the front and the back compared to the repurchased product. Therefore, it is necessary to properly preserve some of the remaining decorative materials.

Experts suggest that, if conditions permit, you can choose to save with colored decorative materials, such as tiles, floors, corner lines, latex paint, paint, etc., in case of wall, floor and other local damage and timely repair. Because, if the time is long, and then purchase the original product, it is very likely that you can not buy the same batch and the same color number of products, so different styles, different color tiles, floor, corner line should be properly stored one or two.

Experts caution that white latex paint does not have chromatic aberration problems, so it is not necessary to keep it. However, consumers should keep all remaining colored latex paint and repair the damaged paint with the remaining latex paint to reduce the chromatic aberration. In order to avoid the insufficient use of the stored latex paint, consumers should also remember the proportion of the colored latex paint, which is convenient for color re-painting.

Save methods vary

Different decorative materials have different preservation methods. In order to avoid the color change caused by the moisture of the tiles and the corners, it is best to wrap the tiles and the corners in plastic bags and place them in a dry place. For the floor, it is more prone to deformation and discoloration due to moisture, so it is best to wrap the floor with a newspaper that absorbs moisture and place it in a dry place. The storage of latex paint is relatively simple. Cover the latex paint bucket with a lid and put it in a cool place. Of course, it is safer to fill it in a sealed container. Consumers should pay attention to the shelf life of latex paint. The water-based latex paint will not be used after 10-20 days. The latex paint without water should also be used within the shelf life. Different latex paints have different shelf life. In general, latex paint can only be stored for half a year after opening.

Wall putty(Skim Coat) is a kind of decorative materials to make wall surface smooth, it can be used in exterior and interior wall decoration. YICHENG HPMC plays an essential role in wall putty(skim coat) to improve the key properties like water retention, open time, crack resistance, workability, etc.

Putty is a kind of substrate used for wall repair and leveling, which lays a good foundation for the next decoration (brushing and painting wallpaper). The putty is divided into two types: the inner wall and the outer wall. The outer wall putty should resist the wind and the sun, so the glue is large, the strength is high, and the environmental protection index is slightly lower. The internal wall putty comprehensive index is good, healthy and environmentally friendly, so the interior wall is not used externally, and the external wall is not used internally. Usually the putty is gypsum or cement based, so that the surface roughness is easier to bond firmly. However, during the construction, it is necessary to apply a layer of interfacial agent on the base layer to seal the base layer and improve the adhesion of the wall surface, so that the putty can be better bonded to the base surface.

HPMC for Wall Putty

HPMC For Wall Putty,Hypromellose HPMC for Wall Putty,Cellulose HPMC For Wall Putty,for Wall Putty Additives HPMC

JINZHOU YICHENG CELLULOSE CO.,LTD. , http://www.hbyichenggroup.com

Posted on