Regardless of whether you are a design or not, everyone has a good vision for their own home. Creating a unique home is a very fulfilling thing. However, it is easier said than done. If we want to implement it, we will easily fall into the trap of decoration. The bathroom decoration has been blind. Xiaobian specially collected a series of blind spots for bathroom decoration, so that you can refuse to decorate the corner and create the perfect home!
One: sanitary ware purchase purchase is useless to do useless work
According to reports, in recent years, consumers have become more and more willing to spend money on bathroom decoration, and in addition to construction, the follow-up investment is also very large, usually only the cost of purchasing sanitary ware will probably account for 1 / of the total renovation 8 or so. Due to the variety of sanitary products, the price varies greatly from a few hundred yuan to more than ten thousand yuan. When consumers buy in the home improvement market, they often pick up their eyes. After buying home, they find that they are not in harmony with their own bathroom. . For example, the hand-washed wash basin in the market is very beautiful, but when you buy it home, you find that it is too big, and it has occupied a part of the space of the toilet, so that neither the tissue box nor the trash can can be "everyone". The result is It is not convenient every time "convenient".
Experts remind: Consumers should consider what kind of products to purchase in the design stage. During construction, they can reserve space according to the specific installation requirements and technical parameters of the purchased products, renovate pipelines, create installation conditions, and ensure decoration. The process can be completed smoothly and the bathroom products can be installed and used normally.
Two: no global conception, decoration and renovation of hidden dangers
Under normal circumstances, the decoration company will draw the decoration design drawings for the owners, including the overall renderings, detailed construction drawings and water circuit reconstruction drawings. However, some owners have not communicated with the designers in advance, and they are not thoughtful. As the construction progresses, the original design is proposed to be revised. In this way, the construction is modified, and the concealed works such as water circuit reconstruction are completed. , leaving hidden dangers for subsequent construction. The reader Zhang was like this. During the construction process, the original design was modified. When he later installed the bathroom mirror and the towel rack, he found that there was no way to face the wall. I don’t know which tile under the tile hidden wire, he can only Slowly recall with the decoration workers, try to avoid the embedding, even if it is not spared.
Experts advise: When there is a water circuit in the bathroom that needs to be modified, the consumer must ask the designer for a circuit transformation map in advance. If there is any change in the construction process, the consumer must communicate with the designer and draw a transformation map. Then start the construction, it is best not to modify it while construction, so as not to injure the wire during the construction of the wall in the future.
Three: design flexibility is not enough to change again
This situation is more common in the bathroom. If the socket on the wall is fixed, the height of the ceiling is found to be in conflict with it, but the tile has been attached and it is difficult to change. Another example is that when the wash basin is installed in place, it is found that the pipeline cannot pass normally, and only has to bend a few corners to wear it out of the bathroom cabinet.
Experts remind: consumers must consider the existing design and future construction is feasible and flexible before purchasing sanitary products. If the faucet needs to pre-embed the appropriate water supply pipeline, the bathroom cabinet requires sufficient installation space. The toilet seat needs to consider the wall distance. The shower room needs to consider the load-bearing wall and the floor drain position. These conditions must be done in the home decoration construction. Only, otherwise the bathroom products can not be installed and used.
EVA Double Colors Sheet is less one production process, which is cutting the grooves than the Eva Faux Teak Sheet. This kind of Marine Sheet is for customers who own a CNC machine to cut the customized pattern based on what they need.
Through a CNC machine, you can make something beautiful more than a straight grooves. The CNC machine can help you to route a pattern, a name, a logo or whatever you like. Once it is done, then a simple peel and stick, the cut sheet can be applied on the boat decking without any more cutting.
Also we are flexible on the colors combination. It can be any color in the bottom, and it can be any color on the top. We intend to provide the best customization for different requirements from different customers.
The standard thickness would be 6mm, but we can also offer a thicker material. For example, to make a customized Helm Station Pad, the thickness should be at lease 13mm or even to 20mm, and this is what we can do for a better products service.
Eva Double Colors Sheet,Eva Marine Sheet,Eva Plastic Foam Sheet,Environmental Eva Foam Sheets,Double Color Eva Foam Sheet ,Double Colors Sheet
Huizhou Melors Plastic Products Factory , https://www.melorsfoam.com