Cable fault tester manufacturers have waveform scaling function

It consists of test host, path signal generator, path signal receiver and locator. It can test high-impedance flashover fault of the cable, high and low resistance grounding, short circuit and cable breakage, poor contact and other faults, and is equipped with a sounding statutory point instrument to accurately determine the exact location of the fault point.

Cable fault detector

1, full-featured, test failure safe, rapid and accurate. The instrument uses low-voltage pulse method and high-voltage flashover method to detect, can test various faults of the cable, and directly test the flashover and high resistance fault of the power cable without burning through. If equipped with sound point meter, can accurately determine the location of the fault point

2, high test accuracy. The instrument uses high-speed data sampling technology with a read resolution of 1m. High degree of intelligence. The test results are automatically displayed on a large-screen LCD with small size and data, and the fault is intuitively judged. And it is equipped with a menu display operation function, which does not require special training for the operator.

3, with wave open and parameter storage, recall function. With non-volatile devices, waveforms and data are not lost after shutdown.

4, with double-track display function. The test waveform of the faulty cable can be compared with the normal waveform, which is helpful for further judgment of the fault.

5, with a waveform scaling function. Change the waveform scale to expand the waveform for accurate testing.

6. Control the measurement cursor, automatically search along the line, and automatically stop at the inflection point of the fault waveform.

7. The position of the double cursor can be arbitrarily changed to directly display the direct distance or relative distance between the fault point and the test point.

8, with a print function. Print out the results of the test.