1. Choose tiles with low water absorption
High-quality tiles typically have a low water absorption rate, which helps them dry faster and resist moisture damage. If the tile doesn’t clearly state its water absorption rate, you can test it by placing a few drops of water or tea on the back. After a few minutes, check how much the water spreads. The less it soaks in, the lower the absorption rate, and the better the quality. Tiles with high absorption may crack or peel off due to temperature changes, especially in areas with extreme weather like northern regions. This is an important consideration when renovating your bathroom.
2. Look for dense tile texture
When selecting tiles, examine the edges to see if the surface is smooth and free from pinholes or uneven thickness. You can also tap the tile lightly—if it produces a clear, crisp sound, it means the tile is dense and hard. These types of tiles are ideal for bathrooms because they are durable, less likely to break, and easier to clean and maintain.
3. Consider wall tiling in humid environments
In areas with high humidity, it’s advisable to use wall tiles instead of just plastering. This not only improves aesthetics but also protects the wall’s waterproof layer from moisture damage. It adds an extra barrier against dampness, making the space more comfortable and long-lasting.
4. Opt for non-slip floor tiles
When shopping for floor tiles, you’ll often hear that matte or slightly textured surfaces are recommended. This is because they offer better slip resistance, which is crucial in wet areas like bathrooms. During installation, make sure the bathroom floor is about 10–20 mm lower than Other rooms. Proper slope and placement of the floor drain are essential to ensure effective drainage. A 1% slope is usually maintained during tiling, with the drain being the lowest point for optimal water flow.
5. Use different colors for dry and wet zones
If you're going for a dry-wet separation design, consider using different tile colors or materials to distinguish between the shower area, toilet, and sink zone. This creates a clear visual boundary, prevents water splashes from spreading, and makes cleaning easier after a bath. This approach is widely used in many countries and adds both function and style to your bathroom.
In summary, bathrooms require tiles that are waterproof, non-slip, and resistant to wear. Floor tiles are usually full-body ceramic for better grip and durability, while wall tiles are often glazed, offering a wide range of colors and excellent stain resistance. Choosing the right tiles ensures both beauty and long-term performance in your bathroom space.
General Purpose Drywall Anchors
Sharp Drywall Anchors,Hollow Brick Expansion Bolt,Special Expansion Bolt,Brick Expansion Bolt
Kunshan Zhonggu Precision Hardware Co., Ltd. , https://www.zgfastener.com