Avoid the bathroom decoration, nine traps, stupid birds can also fly first

Novice decoration, there will be a variety of decoration loopholes, especially for the bathroom, which requires extra attention to the home space, it is easy to fall into the decoration trap. If you don't fully prepare before the renovation, it will be a series of irreparable shortcomings, and it is difficult to enjoy a comfortable home. The small series features a series of decoration traps for everyone, nine percent. More than ten newbie renovations will be made, and after that, become the lucky one of that one tenth!

1, the ground. The floor of the bathroom must be waterproof before laying the floor tiles. It is best to leave a slope of the water drain on the bathroom floor, and the lowest side is placed on the floor to facilitate drainage. Be sure to do a 24-hour water shut-off test during acceptance. If it is a Virgo's children's shoes, pay attention to the floor, not only to slip, but also to be neat.

2, the wall. The tiles on the wall should also be waterproofed. The tiles should be aligned with the seams of the tiles to maintain the overall feel of the bathroom wall. Do not let the children with obsessive-compulsive disorder. If you encounter the outlet of the water supply pipe, the cut of the tile must be small and suitable. It is convenient to cover the incision in the flange cover on the water supply device in the future, so it is beautiful!

3, doors and windows. The bathroom must be equipped with windows, and the case of suffocation in the bathroom in the winter is not unseen. The water in the bathroom is easy to overflow, so the threshold is slightly higher than other places. If it is a sliding door, it is also necessary to make a layer of waterproof between the sliding door and the bathroom floor tiles.

4, ceiling. Because the water vapor in the bathroom is heavier and damp. Therefore, the ceiling of the bathroom should choose materials that are moisture-proof, waterproof, anti-corrosive and rust-proof.

5, the circuit. There must be hanging tin at the wire joint of the bathroom, and it should be wrapped with waterproof tape and insulating tape to ensure no leakage after long use. The wire must be covered with a flame retardant tube; all switches must have a moisture barrier.

6, waterway. The waterway of the bathroom should not be changed too much. The position of the upper and lower water levels can be modified according to the size of the washing machine.

7, ventilation and ventilation. In addition to installing windows, the bathroom must also have an exhaust fan, and the exhaust fan must have a reverse gate to prevent backflow of dirty air.

8, install sanitary ware. Before the renovation, be sure to put a few holes in the water hole to facilitate the purchase of bathtubs, bath rooms, toilets, wash basins and other sanitary wares according to the size. If the toilet is placed, it should be sealed with the toilet mud before installation, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked.

9. Greening. People who understand life should not neglect the greening of the bathroom, choose plants that are resistant to yin and wet, and make it full of life.

Bathroom decoration is one of the important areas of the whole decoration. During the decoration process, you should not buy cheap decoration materials and sanitary wares. For the long-term plan, you should make a reasonable choice in the decoration process!

2 seriese alloy features: The main elements is copper ,and also add Mn, Mg, Pb and Bi for the cutting performance. 2 x x series aluminum plate belongs to aviation aluminum material, and it is not used in conventional industry at present. The characteries of 2 x x series aluminum plate is higher hardness, Aolly application: aviation industry (2014 alloy), screw (2011 alloy) and the industry which use of high temperature  (2017 alloy)

 


Typical Alloy

Typical Temper

Specification

Thickness

Width

2014 2017 2024

 

2.2-15

1100

1150

1200

1250

1300

1350

1500

 


 

Typical Application: Aerospace structural parts, mechanical parts ,cabinet shell , moulding ,building and transportation vehicle .

2 Series Alloy

Aluminium Plate For Plane,Aluminium Plate For Rigging,Transportation Aluminium Plate,Alloy Aluminium Plate For Aerospace

La Ya Aluminium products Co.,Ltd. , https://www.layametal.com

Posted on