Floor arches
The reason for the arching of the floor:
Why is the middle of the living room arched and the rest not arched? What is the reason? There are many reasons for the arching of the floor:
The first reason: due to improper use of the floor, the faucet or heating of the kitchen or toilet runs out of water, causing the floor to stay in water for too long, and the floor is subject to moisture expansion and deformation, which can only be arched due to the expansion of the swelling size.
The second reason is that when the floor is laid, it is too strict and tight, and the floor is too tight to be expanded with the humidity and humidity, and can only be arched;
The third reason is that when the floor is laid, it should be laid against the wall, and a gap of 2cm should be left as a joint. Then it should be covered with footboards. Some consumers should keep the joints as thin as possible even if they are clean. Small pieces of wood, so that the floor can not stretch, only arch!
Solution:
Method one: Replace the new floor. When it is repaired, remove the deformed floorboards, pave the floor with cement and replace it with a new one. In this way, the floor will be leveled out.
Measure 2: Remove the arched wooden block and its surrounding floor, ventilate the air and relieve the problem of arching; or, lift the arched floor from a large area and wait for the ground and keel to dry before laying the floor back.
Floor color difference
Floor color difference reason
What is the reason for the depth of the floor? Does it mean that there is no requirement for the content of the national standard as stated by the factory?
The cause of the color difference: After each tree is cut, the bark is removed, and macroscopically, the main features of its structure are: sapwood and heartwood; annual rings, earlywood and latewood; ducts and tube holes...etc. Among them, the shades of hearts and sapwood of a great part of wood species are obviously different, and the colors of late wood are also different. Therefore, the color difference is a natural structure of wood and is a natural color. For this reason, the floorboards exported to Europe and Japan are They deliberately want to be color-coded, to be scabbed, so as to show the true nature of nature. This is a different style of pursuit. Due to the different pursuit of style, some colors on the surface of the laminate flooring are deliberately made to have a depth and scab, which makes it more natural.
Chromatic aberration does not have special requirements in the upcoming new standards.
Solution:
As paving workers should pay attention when paving, according to different consumer requirements laying, if you like the color evenly, you should pick before laying, paving the wood floor with similar color difference, the color of the floor spread on the placement of furniture The following or at the side, so you can meet the different requirements of consumers.
With regard to the relevant content of the causes of floor arching and color difference, Xiao Bian has introduced it here today. If you have any other questions, please feel free to ask questions and we will answer your questions as soon as possible. For more information, please follow this site!
Flooring Materials Decor Floor Faucet Heating Furniture
We are Aluminium Coil Alloy 5754 H22, Aluminium Coil 5754 H22, Aluminium Coil Alloy for Heat Shield leading manufacturers in China. Customer standards first, and strive to perfect. We do business all over the world.
Aluminium Coil Alloy 5754 H22
Aluminium Coil Alloy 5754 H22, Aluminium Coil 5754 H22, Aluminium Coil Alloy for Heat Shield
Luoyang Jinxuan Electronic Technology Co., Ltd. , http://www.jinxuanalu.com