Section VI Knowledge of Adhesive Materials
Adhesives for wood products : In the construction process of renovation, in the process of processing the wooden molding base layer and the wood surface layer, according to the quality standards and technological requirements issued by the country, the following adhesives are generally used:
1. White latex: It is mainly applied to the bonding of wood keel bases, wooden base layers and finished wooden surface laminates. It is also suitable for wall wallpapers, plastered walls, and increased gel strength. The main ingredient is vinyl acetate. The solidification time is long and it solidifies after 12 hours of general operation. Adhesive strength moderate, basically no expansion and shrinkage, long bonding life, elasticity after bonding; dissolved in water; flame retardant.
2, special floor latex: apply to the composite floor and mouth bonding. The solidification time is longer, and the solidification time is 12 hours after the operation; the bond strength is high, the service life is longer, there is no expansion and contraction, and it does not dissolve in water;
3. Stone Adhesives: Commonly used marble adhesives are mainly used for docking, repairing and installation of finished products. The marble glue solidifies quickly and solidifies within 30 minutes after operation. The adhesive strength is high and the service life is long; no expansion and contraction, and it is fragile by impact;
4, cooked powder: It is mainly applied to the wall surface greasy modulation and wallpaper paste. The cooked rubber powder is solidified slowly and is not used alone; the bonding strength is low and there is shrinkage; it is longer than the 107 gel fiber; it is flame retardant; it dissolves in water.
5, wallpaper glue: dedicated to the wall paste wallpaper, wall cloth and so on. The wallpaper glue solidifies quickly, and solidifies after 4 hours of operation; the adhesive strength is moderate; the service life is generally 5 to 6 years; the shrinkage is small; the fibers are longer; the flame retardant;
6. Glass glue: It is suitable for the bonding and fixing of modeling glass in decoration engineering and also has a certain sealing effect. Slower setting, 6~8 after operation
Hours of solidification; high bond strength, long life; large expansion, high elasticity; flame retardant;
7, waterproof sealant: suitable for waterproof sealing of doors and windows, balcony windows. Water release, slower solidification, solidification after 6 to 8 hours of operation; high bond strength, long life, swelling, elasticity, flame retardancy.
8, PVC special glue: suitable for bonding PVC pipe and fittings. Special PVC, fast solidification. High adhesive force, long life; large expansion, no elasticity; good waterproof performance; flammable; slightly toxic.
9, electrical special glue: suitable for bonding plastic pipe and pipe fittings and insulation seal. For electricians, fast solidification; strong adhesion and long life;
No expansion, no elasticity; good insulation and sealing performance; flame retardant.
Nature Flooring Del Floor Wallpaper Marble Glass Window Decorative Glass Door
1. Attractive high brightness in-ground linear LED luminaire for floodlight, wall wash and wall graze lighting applications.
2. Cree or Lumileds high power LED in range of whites, mono color and RGB and beam angle choices.
3. High brightness contrast level for smooth and consistent color change effect.
4. Extruded aluminum alloy body and clear tempered glass cover.
5. Two-part fixture construction for efficient site preparation, installation and maintenance.
6. DC24V input voltage.
7. Protection class IP67.
In-ground Light, In Ground Lighting, IP67 In-ground Light, Waterproof In-ground Lights, In Ground Lights For Driveway
StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com