In our home decoration, the sink opening is one of the very important steps to be aware of. We need to understand the dimensions of the sink opening and its precautions so that we can decorate the perfect sink. Let's take a look at the dimensions of the opening of the sink and the precautions for opening the hole for your reference.
Sink hole notes
1. Confirm the size of the sink and its digging hole (the curvature of the four corners of the water-containing slot);
2. According to the drawings, determine the center position of the sink, use the template to locate or draw the hole line according to the hole size;
3, first open the hole in the four corners of the hole with a hole opener, and then use a twister to open the hole along the hole line;
4, the edge of the hole milled according to the corresponding edge of the drawings;
5. Apply glass glue evenly on the bottom edge of the sink hole. Put the sink into the hole of the open sink, stick the reinforcement block, and use strong AB glue to reinforce it. After the glue is cured, sealant can be used.
6, in the milling sink hole edge shape and install the sink, you must distinguish the front and back of the table;
7. If the sink is a counter basin, the counter panel does not need to be processed during processing in the factory;
8, if the stage basin to the scene installation, according to the sink hole template draw a good hole line, first open the hole in the hole with a hole opener, and then open the hole along the hole with a twister;
9. Gap the glass glue evenly along the edge of the sink and install it in the hole of the open sink. Clean the excess glass glue and wait for the glue to cure.
Sink hole size
In fact, the size of the sink hole is determined according to the needs, but it is generally based on the size of the sink we have chosen. General sink opening size is 430-480mm, except for some special custom.
The relevant information about the size of the sink opening is introduced here. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
sink
Neoprene Seal or Neoprene Oil Seal is an extremely versatile material that can be found in virtually every industry across the board. It can be die-cut, water jet cut, slit, molded and is available with pressure sensitive adhesive. Neoprene is usually supplied in sheet or roll form.
What is Neoprene Seal or Neoprene oil seal?
Neoprene is a material made from synthetic rubber designed to be flexible, durable, resilient, and very resistant to compression and liquids such as water, oil, and other solvents. Neoprene gaskets are generally made for sealing applications.
An additional benefit of using 50 durometer Neoprene for this particular application, is the fact that it is has good resistance to water absorption, very good resistance to abrasion, oxidation, ozone and sunlight aging.
The Neoprene gasket or Neoprene seal, Neoprene iol seal offers a variety of different solutions for many different applications. This is an extremely diverse material that can handle some of the toughest conditions.
Neoprene Seal
Neoprene Seal,Neoprene Seals,Neoprene Rubber Seals,Neoprene Rubber Oil Seals
Shenyang Guide Rubber Products Co.,Ltd , https://www.guiderubber.com