How does fire retardant coating form a fireproof layer? Fireproof coating is one of the products produced by our company. The quality is reliable and the price is reasonable. How does the fireproof coating form a fireproof layer? Here is a brief introduction to you:
In fact, the ordinary paint we use is flammable. If there is a fire, its fire spreads quickly. Because of this, we will spend a lot of time and energy to develop fireproof coatings, but I can Stop the spread of fire and protect our safety.
There are three conditions for the fireproof coating to burn: one is to have combustibles; the other is to have sufficient oxygen; the third is to reach the point of fire. Three points must be available at the same time. Fireproof coatings are made for them. First, fireproof coatings The composition of course uses non-combustible or flame-retardant materials. In case of fire, it immediately releases the gas that extinguishes the flame.
Its auxiliary ingredients, such as pigments, are also non-combustible. Secondly, a fire retardant is added to it. When it is subjected to high heat, it releases a gas such as carbon dioxide that does not burn, so that the burning things are separated from oxygen, making them lack of Oxygen is extinguished. Some coatings also contain a foaming agent. When burning, a large amount of foam is generated, which is like a foam sprayed from a foam fire extinguisher, forming a barrier layer, and the flame is tightly enclosed, so that it is extinguished due to lack of oxygen. The addition of some low melting point materials that are extremely difficult to burn, such as glass powder and so on.
In the event of a fire, this kind of fireproof coating can be opened on the surface of the burning object, thus forming a layer of insulating fireproof layer. This is the secret of the fireproof coating to prevent the spread of fire.
I will introduce you here today, I hope to help you, sincerely welcome you to buy, look forward to working with you.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
The XUNDA Pipe Anticorrosion Tape is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The Pipe Anticorrosion Tape shall be applied after the Liquid Adhesive and before the Mechanical Protection Tape by hand or with a wrapping machine.
The specification of the Pipe Anticorrosion Tape consists of two layers, adhesive layer and film backing.
Adhesive: butyl rubber
Film backing: Special blend of stabilized polyethylene
Pipe Anticorrosion Tape
Pipeline Tape ,Anticorrosion Tape,Anti Corrosion Tape,Pipe Tape
Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com