After the renovation, the room enters a trial and use phase, during which a series of problems may occur. It is necessary to learn to carry out the necessary maintenance of home decoration in the future use, and to grasp the knowledge of the use and maintenance after home decoration.
Water supply: When the water supply pipe is used for the first time, it may flow out the colored water. The faucet should be turned on. After a period of time, the water will gradually clear. Do not use acidic or alkaline liquids when cleaning the faucet, nor use a rough rag or steel ball, as this will damage the faucet surface. If you do not check in after the renovation, or if you need to go out for a long time after the trip, or when you encounter public water pipe maintenance, it is best to close the inlet valve.
Electrical appliances: Before using electricity for the first time, it is best to check whether the electrical appliances are damp, whether the plugs and wires are intact and safe. Especially electric kettles, electric water heaters, rice cookers, disinfection cabinets and other electrical appliances. New home appliances must be read carefully before using the instructions.
Tiles: Tiles should be cleaned frequently to keep the pattern clear, but be sure to use soft cloth when cleaning. Do not use acid-base liquid or hard brush to scrub, otherwise it will damage the uranium surface of the tile.
Solid wood flooring: walking on solid wood flooring, do not use the sole to drag on the surface, otherwise it will cause the paint surface to become thinner and shorten the service life. If the heel has nails, it is not advisable to walk on it. Do not hit the surface with heavy objects. To avoid direct sunlight on the ground, pay attention to the dry humidity of the mop when cleaning the floor. Never use a wet mop to mop the floor.
Wood products: Wood products include cabinets, cabinets, porches, bookshelves, doors and windows, etc. Pay attention to the moderate force when opening and closing windows and doors, and pay attention to the order of opening and closing the doors and windows on the left and right sides. For places with frequent contact, pay attention to protect the paint surface. The connectors and rails should be lubricated and cleaned, and the spring hinge spacing should be adjusted to prevent slipping out. Doors and windows that do not open for a long time should pay attention to the rust prevention of the connecting parts.
Lift it when moving furniture, and don't drag it on the ground. Pay attention to the dry humidity of the rag when cleaning, especially when cleaning the edge of the side, to prevent moisture from infiltrating, so as to avoid degumming.
MC NYLON is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It`s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃.
-
Advantages:
♦ High strength and stiffness
♦ High impact and notch impact strength
♦ High heat deflection temperature
♦ Good at dampening
♦ Good abrasion resistance
♦ Low coefficient of friction
♦ Good chemical stability against organic solvents and fuels
♦ Excellent electrical properties, ease of printing and dyeing
♦ Food safe, noise reductionDisadvantages:
♦ Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
♦ Poor acidproof ability, can`t dye with acid or touch overmuch acid
uti
Blue Mc Nylon Rod, Green Mc Nylon Rod, Black Mc Nylon Rod, Extruded Mc Nylon Rod
SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , http://www.xyhplastic.com