"China Aluminum Network" mentioned the maintenance of cars, many owners will think of the engine and tires, and a small wheel let us completely ignore, but we have to know whether the good or bad wheels are related to the quality of the car tires, It is related to the safety of our lives, so small wheels are also required to be maintained. If we have damaged our improperly maintained wheels, how can we fix them? The following editor will introduce it to everyone.
The daily maintenance of the wheel:
1. When the hub temperature is high, it should be allowed to cool naturally and then cleaned. Do not use cold water to clean; otherwise, the aluminum alloy hub will be damaged, and even the brake disc will be deformed to affect the braking effect. In addition, cleaning the aluminum Taiwan gold hub with a cleaning agent at high temperatures will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.
2. When the hub is stained with hard-to-remove asphalt, if the general cleaning agent does not help, use a brush to try to clear, but do not use a hard brush, especially iron brush, so as not to damage the hub surface. Experts have introduced a recipe for removing tar: The use of medicinal “active oils†for rubbing can provide unexpected results. The owners may wish to give it a try.
Slight scratches can be repaired on their own:
Step forward: Clean up the hub. We can use paint dilutions to wipe around the wounds to remove the dirt. It is difficult to remove the dirt from the deeper part of the scratch. At this time, it can be completely cleaned with a toothpick. When cleaning, in order to prevent the irrelevant part from being painted by mistake, it is better to stick the adhesive tape around the flaw.
The second step: the owner puts up the brush nib and applies a finishing lacquer to the place where the hub is damaged. After the paint is dry, it is painted slightly to make it easier for the owner to observe.
Step 3: After the car is fully dry, the car paint is applied with soapy water to make the surface smooth. Then use the mixture to wipe the light and wax it later.
Step 4: If the owner finds that there is a deep scar on the hub, be sure to observe whether the metal surface is exposed. If the metal surface cannot be seen, it will not rust. You can concentrate on applying the finish paint. Use a pen tip to point it up little by little and wait for the paint to dry completely. If you find exposed metal, it is better to replace it.
We've supplied Magnetic Filter/ Magnetic Filter Bar/ Water Filter/ Oil Filter/ Magnetic Water Filter Bar global market for decades. Backed by our own magnet factory and assembly factory, we can design and produceMagnetic Filter/ Magnetic Filter Bar/ Water Filter/ Oil Filter/ Magnetic Water Filter Bar as per your special request.
Magnetic Filter/ Filter Magnet / Magnetic Eliminator
Description
1).The magnetic filter tube is consisted of stainless steel tube, spacer, stainless steel plug and strong NdFeB magnet, Ferrite Magnet or SmCo Magnet.
2). The standard diameter we supply is D16, D19, D22, D25, D27.5, D32, D38, D50.8, D76, D101.6, D141, D159 ect. The size length will vary at your requests.
3). The magnetic field strength can reach at a surface Gauss Level (9500GS-15000GS).
Application
Magnetic Filter
Magnetic Filter ,Filter Vessel Magnetic,Permanent Magnetic Filter,Neodymium Magnetic Oil Filter
Chongqing Great Well Magnet Co.,ltd. , https://www.gwmagnet.com