Solid wood doors:
The advantages of solid wood doors: natural environmental protection, giving people the feeling of returning to the basics;
Disadvantages: high price, large deformation and cracking due to external temperature and humidity.
The price of solid wood doors is relatively expensive, and the materials are all natural wood. The moisture content of wood should be between 8% and 12%, so it is also the reason that affects the stability (cracking or deformation) of the finished product. And the dock generally has a finger joint phenomenon, the door core board has a horizontal spelling phenomenon (if the entire door edge and the price of the top of the whole door core board can not come down), the paint surface is generally polyester paint, the door edge and up and down The joint between the dock and the door core board (process seam) is prone to paint cracking. The solid wood door is limited by the nature of the raw materials and the processing technology. The style and style are relatively old-fashioned, which is not in line with people's pursuit of modern and fashionable trends.
Solid wood composite door:
Advantages: Diverse styles, modern fashion, moderate price.
Disadvantages: The quality of each manufacturer is not good.
The price of solid wood composite doors is generally around 1,600 yuan, depending on the price of the veneer material, there will be differences, depending on the manufacturer's cost of sales will vary. The solid wood composite door is produced by the introduction of German technology and technology, and the process is quite mature. The three-layer composite structure, the door core skeleton (substrate) is 30MM laminated material (generally made of pine or fir, because of its low density, light weight, easy to control water content), the core of the door core is solid wood mesh or density. Plate grid, 5MM medium density board on both sides (medium density board has extremely high stability and flatness, which can not be replaced by other materials, and also plays a role in changing the stress of the substrate to prevent deformation), the surface is 0.6MM high-grade Solid wood veneer (such as black walnut, red cherry, rosewood, teak, Sapele, etc., because of the solid wood veneer can also achieve the effect of solid wood doors even better than solid wood doors, such as straight or mountain pattern). The lacquer surface is also generally polyester lacquer. As long as the process and equipment are in place, there will be no lacquer cracking and veneer bubble phenomenon. The solid wood composite door plays a role in reducing the internal stress of the wood in all aspects of the process and materials, so the deformation The chance has been reduced to a minimum.
A large amount of smoke and dust will be produced in the industrial production process, if directly discharged into the air will pollute the environment. Industrial Dust Collector is the dust collector equipment used to separate flue gas and dust. According to the requirements of different industries, industrial dust collectors can be divided into building materials industry dust collector, steel plant dust collector, cement plant dust collector, large industrial boiler dust collector, etc. The bag dust collector and Cyclone Dust Collector produced by our company belong to industrial dust collector, which is a dry dust collector equipment.
Industrial Dust Collector
Industrial Dust Collector,Industrial Ash Remover,Industrial Cyclone Dust Collector,Industrial Type Dust Collector
Henan Dianyan New EnergyTechnology Co. Ltd , http://www.cngasifier.com