The bamboo fiber transporter adopts ultra-thin design (thickness only 24mm) and is equipped with micro-rollers at both ends. Its main purpose is to reduce the space of the joints, ensuring that the slab drop is less than 40mm when the board is installed to avoid slab breakage and lining in the middle. The plate can make the top surface of the belt flat without convex and concave.
The drive roller uses a larger roller diameter to increase the contact area and effectively transmit power. There is a roller under the fuselage, which is reciprocated by chain pulling to facilitate the attachment of the slab.
The micro-roller is small in size and only 22mm in diameter, so the mandrel diameter is smaller, and the available size is only between 8 and 12mm. The mandrel is easily bent when it is subjected to the tensioning force. This is also the design of the plate-loading machine. One of the difficulties that needs to be solved. The micro-roller adopts a split-type, multi-point support design. A mandrel runs through all the ends, and the ends are tightened with nuts to help resist belt tension and gravity and reduce deformation.
Since the mandrel is a super-slim shaft and the processing is difficult, the material is cold-drawn round steel with an accuracy grade of 10, which is low in surface roughness and can be used without processing. The roller material can be cast cast bronze or directly used as a roller in series, so that the belt running resistance will be reduced.
The roller seat is a micro-roller support, which needs to be welded to the belt frame during assembly, and its rigidity is determined by the belt frame. The belt support frame is the most important component of the belt conveyor. It is mainly composed of two parts: the reinforcement frame and the belt intermediate lining.
The reinforced frame and the intermediate lining are integrally connected by screws. Considering the influence of the use environment, the reinforcing frame is designed on the upper side, and the intermediate lining plate is fixed under the screw. The intermediate lining plate adopts an ultra-thin design, so it is easy to bend downward under the action of gravity. To solve this problem, an anti-deformation bolt is arranged at a specified position, and the counter-torque generated by the anti-deformation tensile force can effectively solve the downward direction. The problem of bending.
Jinan Forever Chemical Co.,Ltd founded in 2005, is a production enterprise. Forever Chemical professionally works on AC blowing agents, 2-aminophenol, hydrazine hydrate, Ferric Chloride anhydrous. The factory covers an area of 3,00,00 square meters. The company owns advanced complete sets of equipment and top-quality inspection methods. It has set up good technical cooperation relationship with many state scientific institutes.
Sustainable development is a very important part for our corporate culture. Only with constant development, our company can go further and longer. To achieve this goal in the long term, we continue to increase the amount of foaming gas of AC Blowing Agent. We can produce different types of Azobisformamide, according to customers` different application in different fields.
ADC Blowing Agent Azodicarbonamide,AC Blowing Agent Yellow,Ac Blowing Agent Azodicarbonamide,Rubber AC Blowing Agent
Jinan Forever Chemical Co., Ltd. , https://www.jinanforever.com