Solid wood furniture is more healthy, more environmentally friendly, with higher grades and better quality. It is favored by consumers. Now more and more people have chosen solid wood furniture. Perhaps for most solid wood furniture users, they know very little about the maintenance of solid wood furniture. The daily maintenance of solid wood furniture is directly related to the length of the furniture life. Today we will take a look at the small common sense of the solid wood furniture maintenance that Zhoujia Mansion teaches everyone.
Small common sense of solid wood furniture maintenance - dust removal
Always remove dust, because dust rubs the surface of solid wood furniture every day. It is best to use a clean soft cotton cloth, such as an old white T-shirt or baby cotton. Remember not to wipe your furniture with a sponge or tableware. When dusting, use cotton cloth that has been wrung out after wetting, because the wet cotton cloth can reduce friction and avoid scratching the furniture. It also helps to reduce the adsorption of dust by static electricity, which is good for removing dust from the furniture surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth.
The common sense of solid wood furniture maintenance - cleaning
In order to remove the traces of the furniture surface caused by airborne contaminants, cooking fumes, smudges during handling, and residues from glazing, we recommend the use of special furniture cleaners. This solvent can also help remove excess wax.
Small common sense of solid wood furniture maintenance - waxing
Regular waxing, every 3 months, a layer of wax on the furniture. Before using the glazing wax in the furniture, check if the surface of the lacquer is intact. For newer solid wood furniture, first wipe the surface with a fine cotton cloth. For stains that have been left for too long or difficult to remove, use a cotton cloth with a small amount of gasoline or alcohol. Then use a small piece of cotton cloth to spread a large amount of glazing wax, and then use a larger dry cloth to wipe the wax evenly in a circular block. Before waxing, use a milder non-alkaline soapy water. The old wax is wiped off, and the waxing is not too dense, otherwise it will block the pores of the wood. Excessive waxing can also damage the appearance of the coating. American solid wood furniture is simple, natural and dignified, but it may be deformed or cracked due to changes in wood moisture content, so it is especially necessary to take care, especially in this hot summer. For example, the sun can not be directly exposed for a long time, not too cold or hot, too dry and humid environment is not suitable for solid wood furniture. If the temperature and humidity change is too large due to frequent switching of the air conditioner, even the qualified solid wood furniture products sometimes undergo deformation and cracking.
The common sense of solid wood furniture maintenance - temperature control
Solid wood furniture is generally poor in heat resistance, so keep it away from heat sources when using it. Under normal circumstances, try to avoid direct sunlight, because strong ultraviolet rays will cause the lacquer surface of solid wood furniture to fade; in addition, the heat and luminaires that can emit strong heat will also deform the solid wood furniture, and should be kept away as far as possible; Put the hot water cup, teapot and other things directly on the solid wood furniture, otherwise it will burn the solid wood furniture.
Small common sense of solid wood furniture maintenance - indoor humidity
The indoor humidity of solid wood furniture must be slightly higher than its own moisture content, so consumers should understand the water-containing parameters of solid wood furniture when purchasing furniture, and refer to the ambient humidity indicated on the manual.
The common sense of solid wood furniture maintenance - the structure of the ä¸èƒ½ can not be forgotten
The æ¦«å¯ structure is important for solid wood furniture. Once it loosens or falls off, solid wood furniture cannot be used. Therefore, it is necessary to pay attention to whether there are parts falling off, degumming, broken hoes, loose eyes, etc. at these joints. If the screws and other parts fall off, you can clean the screw holes first, then fill a hole in the hole, and finally reinstall the screws. If the hoe breaks, it needs to be handled by professional maintenance personnel.
The common sense of solid wood furniture maintenance - daily care
Avoid letting the sun shine on the surface of the furniture for a long time, or it is easy to make the internal moisture of the wood unbalanced and cause cracks; in the dry environment in autumn and winter, artificial humidification measures should be used regularly to supplement the excessive loss of water, such as using soft Wipe the furniture after wet cloth; keep good humidity, ideal humidity is about 40%, if you use cold air for a long time, you can put water on the side. The temperature difference should not be too large, avoiding the air conditioner opening and closing, causing the temperature to change drastically; the overheated items should be avoided directly on the furniture surface, which will damage the protective paint and wax on the furniture surface.
The above is the maintenance method of the solid wood furniture that Xiaobian teaches everyone. After buying a good home, it is up to everyone to take care of it. Today, the introduction of Xiaobian is here, I hope I can help you.
Aluminum Casting Auto Parts,Aluminum Auto Parts,Aluminum Spare Auto Parts,Heavy Truck Auto Parts
NINGBO AIKEHAN METAL PRODUCT CO.,LTD , http://www.diecastingsupplier.com