Why stop the spraying machine when you stop the material, stop the water, and stop the power supply, and finally the closing sequence? The first stopping of the material is to stop feeding material into the spraying machine. In the normal operation of the spraying machine, the remaining materials in the spraying machine and the pipeline are consumed cleanly; the water stopping is to prevent the water from flowing into the pipeline under the condition of no wind pressure. ; The blackout is to stop the operation of the spraying machine; the final off-air is to make the remaining material in the spraying machine and the pipeline blow out and keep the pipeline open. If it is not carried out in the above order, it will cause water to flow into the spray pipe, and the remaining material will clog the sprayer or pipeline and affect the normal use of the sprayer.
Carbon Crystal Heater is in the microcrystalline particles by adding far infrared emitters and temperature limiting agent with a special process and preparation technology made.it has good performance in Insulation resistance and flame retardant. When the carbon crystal heater is electrified, it will produce heat in 3-4 minutes. After 3-5 minute, you will feel suitable temperature. The application of the Carbon Crystal Electric Heater has saved the energy and reduced heating coats to a large degree.It's not only warm your room, but also decorate your room.
Carbon Crystal Panel Heater
Carbon Crystal Panel Heater,Carbon Crystal Infrared Panel Heater,Carbon Crystal Panel,Infrared Room Heating Panel
Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com