Transformation of FK_100 copying machine tool

The FK-100 profiling machine was introduced in the early 1980s. The machine tool features a reasonable overall design, and the surface of the guide rail is heat treated. Therefore, the wear resistance is better and the transmission accuracy is higher. However, there are also some shortcomings, mainly because the 1 machine speed regulation adopts the straightening and withering generator set, which has low efficiency and high noise. 2 The electrical control has many intermediate relays and the failure rate is high. 3 The profiling probe has mechanical wear and tear, and it is difficult to adjust the gap. Transform the above conditions separately. There are two options for the transformation of the speed control unit: 1 frequency control. Due to the need to replace the original DC motor and the supporting inverter, the performance is good and the cost is high. 2 DC speed control system. Now various DC speed control modules are mature in technology and low in cost. According to the long service life of the equipment, the original is based on low investment and full utilization.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification

Light Duty

Heavy Duty

Rang of the Door

Single-Leaf

Double-Leaf

Single-Leaf

Double-Leaf

Door leaf max weight

100kg

100kg x 2

200kg

200kg x 2

Mounting Method

Surface mounting or built-in mounting

Open Width

700-2000mm

650-2000mm

750-2000mm

650-2000mm

Power Supply

AC 220v ± 10%, 50-60 Hz

Opening Speed

300-500mm/s (adjustable)

Closing Speed

250-550mm/s (adjustable)

Creep speed

30-100mm/s (adjustable)

Hold-open time

0.5-20s (adjustable)

Airproof Force (Max.)

>70N

Manual Pushing Force

<100N

Electronic Lock Force

>800N

Power consumption

150W

Ambient temperature

-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com

Posted on