When it comes to warmth, I believe most friends in the north should be familiar with the low temperature in winter, and household heating will be used by all households. Floor heating will not only allow the indoor surface temperature to be even and warm, but also save space for beautification and provide a comfortable and healthy environment for humans. Atmosphere. However, the friends who have used the floor heating often encounter the problem that the floor heating is not hot. Therefore, Xiao Bian has collected some relevant contents to analyze the causes and solutions of the warm water backwater , hoping to help everyone.
The reason why the warm water is not hot is :
1, geothermal pipeline gas blocking.
First of all, we can see whether it is running in the warm air pipe and causing the water to stop flowing. If this is the case, immediately turn off the return valve, then open the exhaust valve and open the exhaust gas one by one.
2. The water is not fully discharged.
It is recommended that all the pipes in the geothermal pipe network be discharged after the heating time is over. Avoid the long-term non-removal of the water flow caused by the reduction, poor, causing the pipe network congestion.
3, construction defects
Non-professionals warm the floor, resulting in deadly bends in the floor heating pipes, unreasonable distances between the flattening phenomenon and the row pipes, which can lead to unreasonable warm water flow during later use.
4, geothermal pipe has not been cleaned all year round.
Geothermal pipes will produce biological slime and impurities, bacteria, etc. according to changes in water wetness. They must be cleaned in time. Otherwise, the inner diameter of the floor heating pipe will become smaller and smaller, and the flow of water will naturally be small. The heating effect is very large. Affected. There are some users who are careless, the water is open, and the return valve is not open. How hot can the hot water flow?
Geothermal return pipe not hot solution :
1. If there is air inside the geothermal pipe in the home, it is recommended to open the exhaust valve to release air as much as possible.
2. If there is a lot of sediment in the geothermal pipe network, we can clean it by ourselves. Of course, we can also ask a professional floor heating company to operate it.
3, open the floor heating switch, it is necessary to see clearly, check the return valve is fully open (usually a word for the open, cross-shaped for the closure).
4, if the heating company heating pressure is small, so no matter how to do, the tube will not be hot, for this return pressure is small, it is recommended to install a circulating pump or consultation with the heating company.
Summary of article: The above is the reason why the warm water backwater is not hot and the solution to it. We hope to provide some suggestions and help for those who have encountered the above problems. Later on, our website information will also present more knowledge about floor heating. Welcome to follow us.
FHM fence factory provides a variety of Airport Fence to support your selling.You could have a multiple choice here. According to the fence structure,we could provide chain link wire airport fence and welded wire airport fence.
As a protective fence, using 4.0mm/5.0mm low carbon steel wire to form the main panel. The surface treatment of Airport Fence is coated by galvanization + polyester powder or galvanization+ PVC coating.
600mm V shaped square pipe will be used in the connection of the meshes in 2.5m intervals. Airport Fence with Concertina Razor Wire on the top will increase its security.
Airport Fencing,Airport Fence,Airport Security Fence,Commercial Fencing
DINGZHOU FEIHONG METAL MESH CO.,LTD , https://www.fhmfencing.com