With the improvement of people's living standards, the requirements for the home environment are also getting higher and higher. For example, there are many ways to stick tiles, and different ways of sticking have a great influence on the overall beauty of the home. Even if you buy a good floor tile brand, you can't show a tasteful home if you lay it down. For example, your home decoration style is Mediterranean or European, you can choose to lay diamond tiles. So how do you start laying diamond tiles , how to lay it? We will immediately look at the relevant knowledge.
How to start diamond tile
1. There is a very important thing in the laying of floor tiles, that is, the tiles must be soaked in water before construction. Because the tiles have a certain degree of water absorption, if it is not possible to soak the water in advance, it is likely that part of the moisture in the cement mortar will be sucked away, resulting in the adhesion of the ceramic tile to the wall surface being not firm, and the phenomena of shedding and kicking.
2. The tiled water is just one of the ways, and there must be attention on the cement mortar base material. The proportion is about 1:3. The proportion of 3 cups of sand and 1 cup of cement is almost the same. Don't lower this ratio. If you cut corners, it may also lead to insecure paste.
3. The laying of diamonds is more labor-intensive than traditional laying methods. First, the tiles will be tiled with the wall at a 45-degree angle. It is best to leave gaps between 3 and 8 mm in the paving process, which will create the quaint feeling of the tiles. Grafting agent can choose similar brick color, or choose a contrasting seaming agent to deal with brick seams, which can bring better three-dimensional feeling to the home space. This rhombic floor tile is suitable for European and Mediterranean styles. It doesn't look too rigid, and the diagonal paving effect is even more airy.
How to put a diamond to save
1. Before paving diamond tiles, it is advisable to formulate a paving plan that uses the dimensions of the actual paving area for paving, and then minimize tile waste.
2. If you use a triangular tile of the same size in your paving plan, you can ask a professional processing factory to carry out the processing, which can effectively reduce unnecessary waste caused by workers' cutting.
3, experienced masters in the paving diamond shape, when cutting tiles at the scene, you can very well grasp the sense of proportion, but run into the skills of a little poor master, it is easy to lead to tile cutting damage, causing great waste.
The article concludes: How to start and how to reduce the waste of floor tile is introduced here for everyone. When you use diamond tiles, it is best to consider whether your home style is appropriate. There is also the need to pay attention to leaving a small and smooth gap when paving tiles, which can make the tile life more robust. I hope the above information is helpful to you.
How to start diamond tile
It is mainly used as antirust additive and Corrosion Inhibitor for metals, such as silver, copper, zinc, lead, nickel, etc., and for antirust oil products, the gas phase corrosion inhibitor of copper and aldary, Lubricant Additive, cycle water treating compound and antifreeze. It also can be used with manifold scale inhibitor and sterilization algaecide, it works as corrosion inhibitor very well especially in close cycle cooling water system.
Metal Deactivator & Corrosion Inhibitor
Metal Deactivator, Corrosion Inhibitor
Zhengzhou Chorus Lubricant Additive Co.,Ltd. , https://www.cn-lubricantadditive.com