Determine the Y-bearing of the ring with a migraine

Home>Bearing knowledge>Y-bearings with abdomen to determine the ring
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Determine the Y-bearing of the ring with a migraine

Source: China Bearing Network Time: 2018-06-27
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The Y-bearing that determines the ring with the partial pain is mainly suitable for the occasion where the rotation direction is fixed and inconvenient. On one side of the inner ring of the bearing; there is a partial pain extension; cooperate with the locking ring. The inner ring extension is changed along the rotation direction. Locking ring; the collar and bearing are determined to the shaft. Then use a flat head (fixed) screw to further tighten the collar to the shaft.
SKF is available in two specification series:
One is Y-bearing of YET2 series; its inner ring is extended on one side; and it is used to secure Superagriseal seal on both sides. The painful locking ring is covered with galvanized layer. The outer ring has two smooth holes.
The inner ring of the YEL2 series Y-bearing protrudes on both sides. This helps to reduce the degree of skew of the inner ring to the shaft; makes the bearing work more smoothly. These bearings are equipped with a consolidated standard Superagriseal seal; and the following two oil retaining rings one:
Oil retaining ring made of general steel sheet; type suffix is ​​2F.
Steel slinger with rubber sealing lip (multiple seal); type suffix is ​​2RF.
The outer ring is designed with two smooth holes. SKF can also supply bearings without oil holes according to customer requirements. These bearings are indicated by the suffix W.
These SKF bearings include bearings for metric shafts; suitable for diameters of 15-60mm
Bearings matched with inch shafts; suitable for diameters of 1/2-215/16 inches.
Recommend to friends comments close window

Bearing related knowledge
Rolling bearing bearing requirements for inspection, which procedures are inferior to the bearing, the hazards of the imported bearings, the layout and characteristics of the imported bearings, and the wind power pitch bearing spraying equipment to reduce the labor force


This article links to http://
Please indicate the bearing network http://

Previous:Analysis of the damage of the fan-shaped segment bearing

Titanium Dioxide

Titanium Dioxide Anatase,Titanium Dioxide Rutile,Titanium Dioxide Chloride Process,Titanium Dioxide Sulphate Process

TINOX CHEMIE GMBH , https://www.tinoxglobal.com

Posted on