Locking method for two kinds of bearings

Source: China Bearing Network Time: 2013-02-03

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

There are two types of locking methods for bearings:
1. The bearing attached to the screw only needs to lock the tightening screw on the inner ring extension; the outer bearing housing can be fixed; the screw can be locked with a hex wrench. Please select the hex wrench with the appropriate size.
2. The bearing with the fair locking sleeve has a recess in the locking sleeve; the recess is justified with the inner hole; the inner ring of the bearing seat is also partially fair. Firstly, the fair sleeve is positioned on the inner ring; The direction of rotation of the shaft; the quick change of the bearing sleeve knows that the clamping is stopped; the hex wrench locks the screw.

Recommend to friends comments close window

Bearing related knowledge

Front/rear bearing protection steel combination support bracket instead of copper protection extension bearing life number inner claw bearing puller analysis rolling mill bearing must be steadily overhauled and discriminated
NSK bearing cooperation and load type contact

This article links to http://
Please indicate the bearing network http://

Previous:High-temperature adaptability of NTN bearing Next edition: Determination of machining allowance after quenching of outer ring of carburized steel bearing

Dome Head Open End Blind Rivets

Dome Head Open End Blind Rivets,Head Open End Blind Rivets,Dome Open End Blind Rivets,Dome Head Open Blind Rivets

KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com