The rough house is the original appearance of the house, without any decorative color, it is more difficult to decorate than the simple room and the hardcover room. Therefore, in order to save the trouble of decoration, many owners directly choose the simple room or hardcover room. The renovation of the rough room is very tedious. For some first-time decorators, it is better to first understand the decoration process. Then, the following Xiao Bian will introduce the steps to decorate the rough house .
Steps to decorate the rough house
1. Steps for decorating the rough house - precise measurement
Be sure to clearly understand the area of ​​the house involved in the renovation and the size of each space. Here to remind the owners, we must first measure the size of the wall to be placed furniture, so as not to cause furniture size and wall size does not match, otherwise it is a waste of money and not beautiful. And all measured dimensions must be accurate, even a few millimeters of error will affect the appearance of the decoration.
2. Steps for Renovating the Rough House - Main Body Demolition
After the housing area is measured, it is the demolition of the main body, which mainly includes wall removal, wall building, shoveling of wall coverings, and so on. The meaning of the main body demolishing is to first put the framework first, and the garbage after demolition and reform must be cleared in time to facilitate follow-up work.
3, decoration of the rough room steps - hydropower reform
Before the water circuit is reformed, the first measurement of the cabinet is performed, such as whether the position of the water meter is appropriate or whether the position of the socket of the hood affects the position of the installation in the future. After determining the respective positions of the luminaires and basins, the hydropower is taken in the slot. Pay attention to the bathroom must be waterproof, the kitchen can not do waterproof.
4, decoration blank room steps - tiling
Floor drains need to be bought before the tiling, and you need to buy a floor drain with a rain deodorant function. After waterproofing and brushing are done, you can prepare a tiling. After the tiling is finished, you can make a second measurement of the cabinet.
5, decoration blank room steps - brush wall paint
Brush wall is completed by oil workers, mainly for the basic treatment of the wall surface, brush finishes and other work.
6, decoration blank room steps - installation
The main installation cabinet ceiling, cabinets, doors, floors, sockets, electrical appliances, etc., kitchen and ceiling in the ceiling when you can first put the ceiling lights, exhaust fans and Yuba are installed together, or set aside the head and opening. Then the installation of the cabinets can be completed in one day without special circumstances. The next step is the installation of wooden doors and floors. Then after the wallpaper is laid, you can start installing outlet switches, electrical appliances, and other ready-made items. After the installation is complete, the decoration is basically completed.
The article concludes: Steps on the decoration of the rough room Xiaobian introduced here, and hope to help you for the first time decoration. In addition, here to remind everyone, although the hardcover room can save a lot of decoration troubles, but it does not have to use their own choice of quality material is not guaranteed.
Heat Treated Steel Bar And Tube
Heat treated steel bar is produced by heating and cooling in different temperature based on the steel grades to improve the steel bar mechanical properties or machinability for various industrial applications. Heat treated steel bar includes annealed steel bars, Normalized Steel Bar, quenched and temper qt steel bar.
Annealed Steel Bar has better ductility and lower hardness, which can be easier to be machined. The annealing processing is usually widely used for steel grade with higher carbon content above 0.5%. However, some low carbon steel also requires to do annealing for special usage such as 20CrMnTi gear steel. For some special material such as 20CrMnTi gear steel and GCr15 such bearing steel, spheroidizing annealing is often required.
Normalized steel bar sometime is also one kind of annealing processing. It mainly changes the grain to remove the impurities in steel and improves the strength and hardness. For some hot rolled steel bars, to keep the basic mechanical properties, normalizing is often used.
Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the materials and then cooling in water, oil or other liquid medium, that rapidly the change from austenite to perlite to get the proper properties for various usage. The quenched & tempered steel bar materials are usually with carbon from 0.30% - 0.60%, it is widely used as merchant bars in components of various machines.
Our advantages on producing heat treated steel bars:
1) Big stocks of hot rolled round bars or wire rods as raw materials
2) Wide range of Cold Drawn Steel Bar sizes: from 10mm to 150mm
3) Different cold drawing medias powder or oil to get different surface
4) Straightening machines to get better straightness up to 0.5mm/m
5) Grinding and polishing machines to get better roughness upto 0.4um
6) Heat treating furnaces to adjust the mechanical properties
7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.
8) Multiple packages to avoid broken packages and anti-rusty
Heat Treated Steel Bar And Tube
Astm A193,Round Steel Tubing,Heat Treated Steel Tube,Heat Treated Steel Bar And Tube
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com