It is understood that in the current furniture market, wood furniture has become a major category in the furniture category due to its novel style, bright colors and clear wood grain. Coupled with the relatively modest price of the product, it is increasingly favored by consumers. Experts suggest that when consumers purchase wooden furniture, understanding and mastering the technical requirements and distinguishing the advantages and disadvantages of wooden furniture is an effective way to purchase wooden furniture correctly.
Focus on surface quality
The wood-based panel furniture is made of particleboard, medium-density fiberboard and other wood-based panels. The surface is covered with melamine, PVC, wood veneer and paper wood. The wood-like pattern is clear and natural, smooth and flat. Has a good visual effect and feel. When purchasing furniture, it mainly depends on whether the panels on the surface of furniture materials have scratches, indentations, blisters, debonds, and traces of glue.
Focus on production quality
In the manufacture of wood furniture, the formed plate is formed by combining a saw, a trimming edge, and a component assembly. Look at the production quality of wood-based panel furniture mainly depends on the quality of the saw, the quality of edge and face decoration and the quality of the port of the panel. In the cutting board, the quality requirements for the flatness, verticality, and angle of the plate components are required. After the precision cutting, the board trims the edge profile and the angle is good. After the furniture is made, the plate tilting phenomenon does not occur. .
The edge and face decoration mainly depends on whether the coating components are evenly coated on the decorative component, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the end surface of the visible part, such as the side plate of the component, the door panel, the drawer panel, etc., has good edge sealing. Deal with the traces of adhesion on the edge of the well-decorated plate. Assembling the assembly mainly depends on whether the drill hole is delicate and tidy, and whether the connecting piece is firm after being installed. After the plane is connected with the end face, there is no gap between the T-shaped joints, and there is no looseness by hand. Whether the gap between the door and the drawer is too large, the general requirement is less than 1.5mm, and whether the door and the drawer can be opened and pushed freely and freely.
Note the quality of heavy metal parts and plastic parts
Wooden furniture often uses metal parts and plastic parts as fasteners, so the quality of metal parts also determines the quality of wooden furniture. Metal parts require dexterity, smoothness, good surface plating treatment, no rust, burrs, etc., and the precision of the fittings is high. The plastic parts should be beautiful in appearance, colorful, and the strength of the parts to be used must have strength and elasticity, and should not be too thin. The open-type connector requires flexible rotation, and the inner spring should be loosely fitted, so that the furniture will be smooth and easy to use without friction when it is opened.
Furniture brand plate furniture wood furniture decorative door price
Cross-Linking Agent,Cross Linked Polymer,Crosslinking Agents In Polymers,Collagen Cross Linking
Ningbo Actmix Rubber Chemicals Co.,Ltd. (Ningbo Actmix Polymer Co.,Ltd.) , http://www.actmix-chemicals.com