Gear oil pumps are mainly used in the transfer, oil pressurization, fuel injection, etc. of oil media in chemical, petroleum, mining, metallurgy, power station and other industries, as well as in the thin oil circulation of large machinery and equipment. Gear pumps can be used in all kinds of machinery and equipment. Lubricate the pump for use.
It is understood that the overheating of the motor is a common problem in the working process of the gear pump. The following are specific analysis and detection as follows:
1. Does the scope of use (flow, head) exceed the design requirements of the gear pump?
Select the right motor according to the series
2. Does the specific gravity of the medium exceed the gear pump configuration motor?
Configure the appropriate motor for Shengze gear oil pump
3. Is the packing gland pressure too tight or the mechanical seal spring too tight?
Re-adjust the amount of spring compression of the gland or mechanical seal
4. The pump assembly quality is poor, there is friction or the motor and the pump shaft are not the same?
Exclude assembly failures after checking assembly quality
The above conditions can be analyzed one by one to find out the real cause of motor overheating, and the gear oil pump is processed according to the corresponding fault and maintenance.
Concerned about surprises
Label: Analysis and detection of gear oil pump motor overheating
Previous: Three types of metal laser cutting machine focus position control technology Next: Four major considerations for custom coatings
High speed shutter door is a rapid operating, anti-crash shutter door for indoor application . The most advantage of this door is that the opening/closing speed can reach to 0.6-1.8m/s, really fast action a lot than tranditional rollling shutter door. short opening and closing times reduce cooling loss, avoid airflow and enable a smooth operating procedure. They can also be designed in larger dimensions for the mining and aircraft industries.
High speed door can be easily installed, economical,quiet and efficient with electromechanical drive.
This door quickly though in/out open gate, ideal for warehouses,factories, hangars use, widths can be from 2m to 20 meters.
The material of this door are variety: PVC curtain to keep the insdie clean, heavy duty aluminum door with wind-resisitant function can wrok in heavy windy weather, and also the freezer door can be used in cold warehouse or somewhere like that.
Including models are:PVC High Speed Door, Aluminum Spiral High Speed Door, Self-Recovery repair door, Cold Storage Room Fast Door.
High Speed Door,PVC High Speed Door,Aluminum High Speed Door,Spiral High Speed Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com