Concrete pump pipe, concrete pump pipe for short, referred to as concrete, referred to as concrete pump pipe. It is easy to understand that the pump tube is a new type of construction engineering accessory product that appears along with the emergence of concrete pump. Its appearance has greatly improved the efficiency of building construction. In the past, it was necessary to use a manual or a bucket bucket or a Instead of fighting the fast way to move the concrete delivery to the place where the need to pour, so that construction efficiency increased nearly a hundred times. Its main advantages are: 1. Significant energy-saving: energy-saving 20% ​​than the SCR IF, high-frequency energy than the tube 30%. 2. Easy to install, easy to operate. 3. Sensor isolation by the transformer, safe. 4. Environmental protection: no pollution, noise and dust. 5. Low failure rate: rigorous screening of components, testing, to ensure stable equipment. Reduce the impact of harmonics on the power grid and pollution. Concrete pump pipe is made of special material steel pipe, through the inner wall quenching, carburizing chemical treatment, flange bushings hardness of 58-60 degrees, pipe life 3-5 times, allowing users to save time and costs, eliminating the need for Frequent replacement of the trouble, improve production efficiency. Not quenched concrete pump and quenched concrete pump pipe performance and life expectancy is not the same, after quenching concrete pump pipe can be transported nearly million cubic meters of concrete.