There are more and more consumers who currently use wood floors to decorate their homes. Solid wood floor is warm and elegant, warm and soft, warm, can reduce noise, comfortable and elastic foot feel favored by consumers. When purchasing solid wood flooring, refer to the following points:
First, measure the moisture content of the floor
National standards stipulate that the moisture content of wood floors is 8% to 13%. In fact, our country has a vast territory and different regions have different moisture content requirements. Distributors of general wood floors should have moisture content meters. If they do not, they will not pay attention to this technical index of water content. At the time of purchase, the moisture content of the wooden floor selected in the exhibition hall shall be measured first, and then the moisture content of the wooden flooring of the same species and the same specifications of the unopened packaging shall be measured. If the difference is +2%, the moisture content may be regarded as qualified.
Second, observe the accuracy of wood flooring
General wooden floor can be removed out of the box after about 10 freehand assembly, observe the enterprise mouth bite, assembly gap, the difference between the adjacent plate height, if the strict joint, feel no significant height difference.
Third, check the defects of the substrate
First check whether the same species, whether mixed species, whether the floor dead, live, cracking, decay, bacteria and other defects. As for the color difference of the floor, since the wooden floor is a natural wood product, there are objectively chromatic aberrations and uneven patterns, which cannot be avoided. And the feeling of returning to nature after paving the solid wood floor is in its natural color and pattern. If it is excessively pursuing the floor without chromatic aberration, it is unreasonable, as long as it can be adjusted slightly when paving.
Fourth, select the board surface, paint quality
The key to the purchase is the smoothness of the paint film, no bubbles, paint leakage, and abrasion resistance.
V. Identify wood species
At present, the name of the species on the market is very confusing. Due to the different growth environment of the wood, the material of the same species is slightly different. The price of raw materials is not the same, but the imported material is not better than the domestic material. There are many kinds of trees in our country and many resources are abundant. The tree species in the region are both good and the price is lower than that of similar imported materials. Some manufacturers promote the sale of wood with a variety of wood names that are not in line with wood science, such as: cherry wood, rosewood, gold does not change, Yu Tan Incense and other names; What is more, with low-grade high-grade wood, consumers must not be confused by the name, clear material, so as not to be taken. In fact, when buying wood floors, it is best to buy brands with good reputation and high reputation. In addition to quality assurance, regular enterprises have a certain warranty period for the products, and warping and deformation that occur during the warranty period. , dry cracks and other issues, manufacturers responsible for repair, can remove the worries of consumers.
Six, determine the appropriate length, width
Solid wood flooring is not the longer and the wider the better, it is recommended to choose the short length of the floor, not easy to deformation; length, width of the wood floor is relatively easy to deform.
Del floor three trees lacquer decoration
Alnico Cow Magnet,Cast Alnico Magnet,Alnico Horseshoe Magnet
Ningbo Hegao Magnetic Technology Co.,Ltd , http://www.allmagnetstores.com