During the renovation process, there are a lot of places to deal with the wall. If you feel that the wall has to be overstretched, you will find it difficult to read the wall... Every job is sloppy. In fact, in the renovation, the treatment of the wall is very important. Apart from the fact that the wall surface is the main factor in dividing the interior space, the well-designed and well-built wall can also play a good decorative effect.
If you do not notice the importance of the wall in construction, carelessness, or erroneous procedures, it may bring a lot of inconvenience to the life after you stay. Whether it is brush coating or wall renovation, there are important points to pay attention to, and the spring brushing wall needs to pay attention to many issues.
â– Seasonal
Leave the wall dry for time
Under the influence of changes in weather conditions such as moisture content and temperature throughout the year, cracks in the walls of newly renovated houses are inevitable. However, in the spring where the air humidity is relatively high, if the grass is not dry enough to paint, cracks are more likely to occur. Therefore, the decoration of the wall must pay attention to the treatment of the grassroots.
According to Wang Xiangmu of the Engineering Department of Qoda Decorations, the wall lining is scraped three times before the wall paint is applied. The normal dry time between each pass is 1 to 2 days. Spring is a rainy season. The wall ash used must be waterproof, moisture-proof, anti-powdering, and mildew-proof. If you scratch the wall lining on a rainy day, use a dry cloth to wipe off the wall vapour and keep the wall dry as much as possible. At the same time, the wall lining drying time should be extended as much as possible according to the actual conditions of the weather.
Ma Bingyin, chief designer of Qoda Decorations, told reporters that due to the hot flashes in the spring, the paint absorbs moisture from the air and generates a layer of matte, which makes the paint emulsified and white. Therefore, in the spring, wood product paints can be considered as blow drying agents. Let the paint dry quickly. There are many details that should be noticed in the spring decoration. For example, to buy latex paints and adhesives must be flexible.
â– Quality inspection
Wall joints must be tightly seamed
According to Wang Xiangmu of the Engineering Department of Qoda Decorations, there are different methods and methods for inspecting wall projects for different wall types.
Partition wall: Generally refers to the light steel keel as the skeleton, with paper gypsum board, cement pressure board or plywood, etc. to do the partition panel project. Such projects must ensure that the type, grade, specification, and color of the materials used must meet the design and current standards. Can be observed, hand Wrench, Ruler and check the product certification and other methods to test.
Advanced plastering wall: It includes advanced plastering projects such as lime mortar, cement mortar, and mixed mortar. This kind of project must first ensure that the plastering substrate meets the standards, and the positions of the columns in the column are correct. Second, the plastering surface should be smooth, clean, and uniform in color. Third, the size of the plaster behind the holes, slots and pipes is reasonable. The above content can be observed with the eyes, touched by hand, tapped with a small hammer, and checked with a ruler.
Paste finishes: surface finishes such as wallpapers and wall coverings. The variety, grade, performance, specification, and color of the surface materials and auxiliary materials must comply with the fire protection regulations for design and interior decoration. The inspection method mainly depends on the observation of the eye, the paste decoration surface should have the same color, the positive and the strabismus have no glue mark, no obvious indentation; the splicing place is horizontal and vertical, and the patchwork is not obvious from the wall with 1m front view; the paste and plywood, kicking Boards and other splice junctions closely.
â– Experience
Daxin board needs adaptive drying time
â— Ai Yu Chau, woodworking master
Daxin board requires clear and smooth texture and no surface fringes. In fact, Daxinban requires high decoration process, especially in the wet spring, it needs enough space to allow the wood to have sufficient time for adaptable natural drying, and also to control the drying process strictly through the drying kiln.
Spring paint to air conditioning wet
â— Wenshasha, head of department
As my home was renovated in the spring, the latex paint used on the wall was slow to dry, and it was also prone to mildew. Therefore, the foreman taught me a solution, that is, after the construction of open air conditioning, dehumidification, completely remove the moisture in the air, the effect is really good.
Brush painting requires clean environment and tools
â— Song Yang, teacher
Not long after my house was renovated, the wall blisters. Later, the decoration company helped me redo it again and told me that I should avoid brushing in the humid season. In addition, I must wait for putty or dry film before painting. The most important thing is that the paint should be cleaned before construction. Construction environment and painting equipment.
If you do not notice the importance of the wall in construction, carelessness, or erroneous procedures, it may bring a lot of inconvenience to the life after you stay. Whether it is brush coating or wall renovation, there are important points to pay attention to, and the spring brushing wall needs to pay attention to many issues.
â– Seasonal
Leave the wall dry for time
Under the influence of changes in weather conditions such as moisture content and temperature throughout the year, cracks in the walls of newly renovated houses are inevitable. However, in the spring where the air humidity is relatively high, if the grass is not dry enough to paint, cracks are more likely to occur. Therefore, the decoration of the wall must pay attention to the treatment of the grassroots.
According to Wang Xiangmu of the Engineering Department of Qoda Decorations, the wall lining is scraped three times before the wall paint is applied. The normal dry time between each pass is 1 to 2 days. Spring is a rainy season. The wall ash used must be waterproof, moisture-proof, anti-powdering, and mildew-proof. If you scratch the wall lining on a rainy day, use a dry cloth to wipe off the wall vapour and keep the wall dry as much as possible. At the same time, the wall lining drying time should be extended as much as possible according to the actual conditions of the weather.
Ma Bingyin, chief designer of Qoda Decorations, told reporters that due to the hot flashes in the spring, the paint absorbs moisture from the air and generates a layer of matte, which makes the paint emulsified and white. Therefore, in the spring, wood product paints can be considered as blow drying agents. Let the paint dry quickly. There are many details that should be noticed in the spring decoration. For example, to buy latex paints and adhesives must be flexible.
â– Quality inspection
Wall joints must be tightly seamed
According to Wang Xiangmu of the Engineering Department of Qoda Decorations, there are different methods and methods for inspecting wall projects for different wall types.
Partition wall: Generally refers to the light steel keel as the skeleton, with paper gypsum board, cement pressure board or plywood, etc. to do the partition panel project. Such projects must ensure that the type, grade, specification, and color of the materials used must meet the design and current standards. Can be observed, hand Wrench, Ruler and check the product certification and other methods to test.
Advanced plastering wall: It includes advanced plastering projects such as lime mortar, cement mortar, and mixed mortar. This kind of project must first ensure that the plastering substrate meets the standards, and the positions of the columns in the column are correct. Second, the plastering surface should be smooth, clean, and uniform in color. Third, the size of the plaster behind the holes, slots and pipes is reasonable. The above content can be observed with the eyes, touched by hand, tapped with a small hammer, and checked with a ruler.
Paste finishes: surface finishes such as wallpapers and wall coverings. The variety, grade, performance, specification, and color of the surface materials and auxiliary materials must comply with the fire protection regulations for design and interior decoration. The inspection method mainly depends on the observation of the eye, the paste decoration surface should have the same color, the positive and the strabismus have no glue mark, no obvious indentation; the splicing place is horizontal and vertical, and the patchwork is not obvious from the wall with 1m front view; the paste and plywood, kicking Boards and other splice junctions closely.
â– Experience
Daxin board needs adaptive drying time
â— Ai Yu Chau, woodworking master
Daxin board requires clear and smooth texture and no surface fringes. In fact, Daxinban requires high decoration process, especially in the wet spring, it needs enough space to allow the wood to have sufficient time for adaptable natural drying, and also to control the drying process strictly through the drying kiln.
Spring paint to air conditioning wet
â— Wenshasha, head of department
As my home was renovated in the spring, the latex paint used on the wall was slow to dry, and it was also prone to mildew. Therefore, the foreman taught me a solution, that is, after the construction of open air conditioning, dehumidification, completely remove the moisture in the air, the effect is really good.
Brush painting requires clean environment and tools
â— Song Yang, teacher
Not long after my house was renovated, the wall blisters. Later, the decoration company helped me redo it again and told me that I should avoid brushing in the humid season. In addition, I must wait for putty or dry film before painting. The most important thing is that the paint should be cleaned before construction. Construction environment and painting equipment.
Three trees lacquer porch decoration paint decoration design decoration decoration company latex paint decoration find decoration company okay decoration partition partition door
Hand Saw,Power Tool,Electric Saw
Aojin Hose Clamp Factory , http://www.tjhoseclamp.com