Network cameras function as eyes in security monitoring. Their use environments are complex. They are mostly outdoors and in bad places. If they are used improperly, the camera's aging and scrapping speeds are bound to increase. For the unique structure of the network camera, there are the following things to pay attention to.
1. Do not disassemble the camera
Network cameras are generally produced by professional manufacturers, and their structures are precise. There are no parts that users can repair by themselves. If they are not necessary, do not disassemble the camera and do not remove the screws or protection. If there is any problem, they should be contacted directly. The maintenance personnel or directly send the camera to the maintenance department for inspection.
Consequences of blind demolition: Lightly touch its internal parts, it is easy to cause damage to the camera, the failure to expand, causing greater losses, once the damage dealer estimates will not be given warranty. When it is heavy, it causes an electric shock and the consequences are unimaginable.
2. Be careful when using the camera
Do not use the camera. Should avoid collision or vibration. Cameras that are used or stored improperly will be damaged. Avoid contact with the camera with oil, steam, moisture, moisture, and dust, and avoid direct contact with water. Do not pull and twist the cable. Similar actions may damage the camera. Do not install the camera upside down if the camera is designed for installation on a ceiling or wall. If it is used upside down, for example, when it is installed on the floor, it may cause the camera to malfunction.
3. When cleaning the camera body, do not use strong or abrasive cleaning agents and organic solvents to wipe the camera
When the camera is dirty, wipe it with a dry soft cloth. If the dirt is serious, wipe gently with a mild detergent. When wiping, be careful not to scratch the round protective cover. Then wipe the cleaner off with a dry cloth. The camera should be stored in a clean, dry place during storage.
4. Do not aim the camera at the sun
Do not aim the camera at bright objects. Whether the camera is in use or not in use, it must not be aimed at the sun or other very bright objects. Otherwise, the image sensor of the camera may be damaged, which may cause image blur or halo. Never expose the camera to a place exposed to the light source for a long time. If a spotlight such as a spotlight forms a light spot on the display screen, part of the image will fade due to deterioration of the CCD's filter operation when the camera changes its face.
5. Do not use the camera outside the temperature, humidity or power specifications
Do not use the camcorder in extreme environments of high temperature and humidity. Do not place near accessories such as heating, stoves, or other heat generating equipment.
6. Do not install the camera near the air outlet of the air conditioner
In the following cases, the lens will fog due to condensation.
l Rapid temperature changes caused by the air conditioner turning on and off.
l Rapid temperature changes caused by opening and closing the door.
l Use in an environment that can make glasses fogging.
l Use in a room filled with smoke or dust.
If the lens is fogged by condensation, remove the cover and wipe off any moisture on the surface with a soft cloth.
7. Consumables
Contacted parts, such as lens drive motors, cooling fan motors, and internally mounted slide rings wear out over time. For replacement and maintenance of these parts, consult your nearest service center.
8. Do not point the camera at the same object for a long time
This burns a shadow of the object on the screen of the cathode ray tube.
1. Do not disassemble the camera
Network cameras are generally produced by professional manufacturers, and their structures are precise. There are no parts that users can repair by themselves. If they are not necessary, do not disassemble the camera and do not remove the screws or protection. If there is any problem, they should be contacted directly. The maintenance personnel or directly send the camera to the maintenance department for inspection.
Consequences of blind demolition: Lightly touch its internal parts, it is easy to cause damage to the camera, the failure to expand, causing greater losses, once the damage dealer estimates will not be given warranty. When it is heavy, it causes an electric shock and the consequences are unimaginable.
2. Be careful when using the camera
Do not use the camera. Should avoid collision or vibration. Cameras that are used or stored improperly will be damaged. Avoid contact with the camera with oil, steam, moisture, moisture, and dust, and avoid direct contact with water. Do not pull and twist the cable. Similar actions may damage the camera. Do not install the camera upside down if the camera is designed for installation on a ceiling or wall. If it is used upside down, for example, when it is installed on the floor, it may cause the camera to malfunction.
3. When cleaning the camera body, do not use strong or abrasive cleaning agents and organic solvents to wipe the camera
When the camera is dirty, wipe it with a dry soft cloth. If the dirt is serious, wipe gently with a mild detergent. When wiping, be careful not to scratch the round protective cover. Then wipe the cleaner off with a dry cloth. The camera should be stored in a clean, dry place during storage.
4. Do not aim the camera at the sun
Do not aim the camera at bright objects. Whether the camera is in use or not in use, it must not be aimed at the sun or other very bright objects. Otherwise, the image sensor of the camera may be damaged, which may cause image blur or halo. Never expose the camera to a place exposed to the light source for a long time. If a spotlight such as a spotlight forms a light spot on the display screen, part of the image will fade due to deterioration of the CCD's filter operation when the camera changes its face.
5. Do not use the camera outside the temperature, humidity or power specifications
Do not use the camcorder in extreme environments of high temperature and humidity. Do not place near accessories such as heating, stoves, or other heat generating equipment.
6. Do not install the camera near the air outlet of the air conditioner
In the following cases, the lens will fog due to condensation.
l Rapid temperature changes caused by the air conditioner turning on and off.
l Rapid temperature changes caused by opening and closing the door.
l Use in an environment that can make glasses fogging.
l Use in a room filled with smoke or dust.
If the lens is fogged by condensation, remove the cover and wipe off any moisture on the surface with a soft cloth.
7. Consumables
Contacted parts, such as lens drive motors, cooling fan motors, and internally mounted slide rings wear out over time. For replacement and maintenance of these parts, consult your nearest service center.
8. Do not point the camera at the same object for a long time
This burns a shadow of the object on the screen of the cathode ray tube.