Daily maintenance of solid wood flooring

How to clean and maintain the solid wood floor

After the solid wood floor is laid, it must be used for at least 24 hours before it can be used, otherwise it will affect the use of solid wood flooring. General solid wood flooring poor water resistance, should not use wet cloth or water to wipe, so as not to lose luster. In the following daily life, solid wood flooring must be maintained. The specific measures are as follows: During daily use, care should be taken to avoid scratching the floor with hard objects such as heavy metal sharps, glass tiles, and spikes; do not use the floor surface when moving furniture. Drag; do not touch the floor with an open flame or place a high-power electric heater directly on the floor; do not place strong acidic and alkaline substances on the floor; absolutely prohibit long-term flooding. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low. If the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. When it is hot and humid, you can drive in an air conditioner or an electric fan. The humidity in the room should not be too large. Keep the floor dry, smooth and clean. Use a wrung cotton mop to clean it everyday. In case of stubborn stains, wipe with a neutral cleaning solvent and wipe it with a wrung cotton mop. Never use it. Wash with an organic solvent such as an acid, a basic solvent, or gasoline. In order to maintain the aesthetic appearance of the floor and extend the life of the paint. It is recommended to wax twice a year for maintenance. Wipe the floor clean before waxing, then smear a layer of floor wax evenly on the surface, dry it slightly and wipe it with a soft cloth until it is smooth and bright. If large-scale flooding occurs or water is partially immersed in water for a long time, dry water should be promptly dried with a dry cloth and allowed to dry naturally. Drying with an electric heater or exposure to sunlight is strictly forbidden. Exposure to strong sunlight for a long time, or sudden temperature fluctuations in the room, may cause premature aging of solid wood floor finishes and should be avoided as much as possible. If the installation is complete, for example, it is temporarily not possible. To maintain the circulation of indoor air, do not cover it with plastic paper or newspapers, so as to avoid long-term surface film stickiness and loss of luster. Clean the floor regularly, vacuuming, and prevent sand or frictional dust from accumulating to scratch the floor surface. A doormat may be placed outside the door to prevent sand or frictional dust from being carried into the room. Clean the floor with a dry cotton mop. Do not wipe the floor with a wet mop or a corrosive liquid such as soapy water or petrol. In order to increase indoor air humidity in autumn and winter seasons, humidifiers can be used to keep indoor air humidity between 50% and 70%. When moving furniture, it should not be pushed or pulled directly on the floor. It should be lifted and moved gently. Furniture that moves frequently can have a rubber on the bottom.

Del flooring nature flooring furniture paint room window glass furniture glass door

Alloy Steel Boiler Tube

Alloy Steel Boiler Tube,High Temperature Boiler Tube,Spiral High Temperature Boiler Tube,Steel Boiler Tube

YUHONG GROUP CO.,LIMITED , http://www.alloypipeline.com

Posted on