System structure IC is not networked access control, elevator floor control authorization system uses no network authorization method, permission write IC card, access controller uses IC embedded door machine, does not connect with the computer for network authorization; authorized card can be opened by the corresponding door. A minimal authorization system must include a card issuer, an IC embedded access controller, and several IC cards. Card issuer: The hardware is the same as the IC embedded access controller, but it has different functions. The card issuer connects the software on the computer desktop for authorized card issuance and other operations. IC embedded access controller: installed in the access control position, you need to use the mother card authorization to install and use. The elevator controller must be controlled by the IC embedded access controller. An elevator controller and an IC embedded access controller are installed inside the elevator car. The authorized card is swiped in the IC embedded access controller and connected to the elevator control through 485. Opens the corresponding floor.
Basic parameters An IC card can authorize up to 128 doors and 6 elevator controllers. You can manage unlimited number of cards. Each IC embedded access controller supports 3000 blacklist <br> <br> Notes 1.IC non-networked access control, elevator floor control system authorized copy of the program can be used without installation. 2. Does not require access control software, do not need to copy to the access control software installation directory. 3. The new IC embedded access controller must be used (different programs in the device). 4. This system is not compatible with the original non-networking authorization and cannot be mixed. 5. The system does not use a database, use an XML file to save the data, all in the AccessData directory.
Use Process 1. Install IC Authorization Software.
2. Connect the card issuer to make a mother card.
3. Connect each controller for registration, authorization with the mother card, and set the machine number according to the installation location.
4. Connect the card issuer, register card, register card.
5. Authorize the registered card.
Steps Step 1 Make a mother card 『Note: At least one parent card must be created for a project. If multiple copies are required, the password must be the same and the mother card cannot be used for other purposes.
1. Connect the card dispenser to your computer.
2. Place a blank IC card on the card dispenser.
3. Open the mother card management interface and enter the 6-digit password in the authorization password. "Please remember the password
4. Click Create Authorization Card (Mother Card), and the sound of the issuer's prompt indicates successful production.
Step 2 Controller Settings
1. Connect the controller to the computer.
2. Open the controller management interface.
3. Click Read Settings, the controller information will be automatically added to the interface.
4. Modify the corresponding data, including the name and the machine number. The same machine number has the same control.
5. Click Update Settings to update the machine number information to the controller.
The third step is to use the mother card to authorize the controller to use the mother card to authorize the controller to use.
1. Connect the controller to the computer.
2. Put the mother card on the controller and click on the mother card to prompt for success.
3. The controller after the mother card is authorized can be installed.
Step 4 Card Management
1. Put the mother card on the card-issuing machine, hit the developer card interface, and click on the card-issuing authorization to prompt success.
2. Remove the mother card and place a blank IC card on the card dispenser.
3. Open the card management interface, click Read Card, the read out card will be automatically added to the system.
4. Click on the blank card to register and prompt success.
5. Modify the card's permissions and click Write permission.
6. Authorization is completed.
Step 5 Write-off card
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a card that needs to be written off on the card dispenser.
3. Open the card management interface and click Card Logout.
4. After cancellation, the card can be re-registered and used.
Step 6 Increase Black List
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a black card registration card on the card dispenser.
3. Open the card management interface, select the card that needs to be added to the blacklist, and right-click to execute the setup blacklist.
4. Open the "Blacklist Management" screen, select up to 5 blacklist card numbers and click Register Blacklist to Card.
5. Swipe cards with blacklist cards to each controller. There is a voice prompt.
Step 7 Delete the blacklist
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a black card registration card on the card dispenser.
3. Open the "Blacklist Management" interface, select the number of card numbers to be cancelled up to 5 blacklists, click to cancel the blacklist to the card.
4. Have a card that needs to be blacklisted and swipe to each controller. There is a voice prompt.
5. Open the "Blacklist Management" interface, select the blacklist to cancel, and right-click to delete the blacklist.
(Source: Opportunity)
Basic parameters An IC card can authorize up to 128 doors and 6 elevator controllers. You can manage unlimited number of cards. Each IC embedded access controller supports 3000 blacklist <br> <br> Notes 1.IC non-networked access control, elevator floor control system authorized copy of the program can be used without installation. 2. Does not require access control software, do not need to copy to the access control software installation directory. 3. The new IC embedded access controller must be used (different programs in the device). 4. This system is not compatible with the original non-networking authorization and cannot be mixed. 5. The system does not use a database, use an XML file to save the data, all in the AccessData directory.
Use Process 1. Install IC Authorization Software.
2. Connect the card issuer to make a mother card.
3. Connect each controller for registration, authorization with the mother card, and set the machine number according to the installation location.
4. Connect the card issuer, register card, register card.
5. Authorize the registered card.
Steps Step 1 Make a mother card 『Note: At least one parent card must be created for a project. If multiple copies are required, the password must be the same and the mother card cannot be used for other purposes.
1. Connect the card dispenser to your computer.
2. Place a blank IC card on the card dispenser.
3. Open the mother card management interface and enter the 6-digit password in the authorization password. "Please remember the password
4. Click Create Authorization Card (Mother Card), and the sound of the issuer's prompt indicates successful production.
Step 2 Controller Settings
1. Connect the controller to the computer.
2. Open the controller management interface.
3. Click Read Settings, the controller information will be automatically added to the interface.
4. Modify the corresponding data, including the name and the machine number. The same machine number has the same control.
5. Click Update Settings to update the machine number information to the controller.
The third step is to use the mother card to authorize the controller to use the mother card to authorize the controller to use.
1. Connect the controller to the computer.
2. Put the mother card on the controller and click on the mother card to prompt for success.
3. The controller after the mother card is authorized can be installed.
Step 4 Card Management
1. Put the mother card on the card-issuing machine, hit the developer card interface, and click on the card-issuing authorization to prompt success.
2. Remove the mother card and place a blank IC card on the card dispenser.
3. Open the card management interface, click Read Card, the read out card will be automatically added to the system.
4. Click on the blank card to register and prompt success.
5. Modify the card's permissions and click Write permission.
6. Authorization is completed.
Step 5 Write-off card
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a card that needs to be written off on the card dispenser.
3. Open the card management interface and click Card Logout.
4. After cancellation, the card can be re-registered and used.
Step 6 Increase Black List
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a black card registration card on the card dispenser.
3. Open the card management interface, select the card that needs to be added to the blacklist, and right-click to execute the setup blacklist.
4. Open the "Blacklist Management" screen, select up to 5 blacklist card numbers and click Register Blacklist to Card.
5. Swipe cards with blacklist cards to each controller. There is a voice prompt.
Step 7 Delete the blacklist
1. Place the mother card on the card dispenser and click the card issuer to authorize it.
2. Remove the mother card and place a black card registration card on the card dispenser.
3. Open the "Blacklist Management" interface, select the number of card numbers to be cancelled up to 5 blacklists, click to cancel the blacklist to the card.
4. Have a card that needs to be blacklisted and swipe to each controller. There is a voice prompt.
5. Open the "Blacklist Management" interface, select the blacklist to cancel, and right-click to delete the blacklist.
(Source: Opportunity)